Radios/Telephones with External Antenna Wiring Harnesses Overview

Radios/Telephones with External Antenna Wiring Harnesses Overview






1 Positive Connection

• Red wire with suitable connection.

2 To Terminal 15a

• Connection to terminal 15a.

• Ensure wire is protected by fuse.

• Fuse: maximum 15 A

3 Antenna Ground

• Make sure the ground is connected to the body properly.

• Antenna location must be treated with suitable corrosion protection.

4 Transmitting/Receiving Antenna

• Installed locations, refer to => [ Radios/Telephones with External Antenna, Antenna Installation Locations ] Locations.

5 Shielded Antenna Wire

• Wire with coaxial connector.

6 Radio

7 Wiring Harness

• Power supply (+) red wire with 2.5 mm 2 cross section.

• Power supply (-) brown wire with 2.5 mm 2 cross section.

• Wire to terminal 15a, black wire, 1.5 mm 2 cross section.

8 Fuse Holder

• Attach next to the battery.

9 To The Starter

10 Battery

11 Negative Wire

12 Body Ground