Noise Insulation

Noise Insulation

• The noise insulation is not installed in all models.

Removing






- Remove the retaining clips - 3 - (8 pieces) from the hood - 1 - with the (80 - 200).

- Remove the noise insulation - 2 - from the oblong holes in the hood - 1 -.

Installation






• When installing the noise insulation - 2 -, be sure to install the retaining clips - 3 - (8 pieces) with the wide side facing in.

- Check the retaining clips - 3 - for damage and replace if necessary.

- Install the noise insulation- 2 - into the oblong holes in the hood - 1 -.

- Lock all the clips - 3 - into the hood - 1 -.