Rear Lid Hinge

Rear Lid Hinge

Removing






- Remove the rear lid - 5 -. Refer to => [ Rear Lid ] Rear Lid.

- Lower the headliner in the rear section (do not remove)..

- Remove the nuts - 4 - and remove the hinge - 2 - as well as the washer - 3 -.

Installation






Install in reverse order of removal.

Nut - 4 - tightening specification: 24 Nm

- Adjust the rear lid. Refer to => [ Rear Lid, Adjusting ] Rear Lid, Adjusting.

• Perform a function test on the unlocking components before closing the rear lid.