Release Element

Release Element

Removing






- Removed trim panel rear lid lock..

- Disconnect the connector - 1 - from the unlocking element - 2 -.

- Remove the bolts - 3 -.

- Turn the unlocking element - 2 - in the direction of the - arrow a - until the hooks - 4 - are behind the tread - 5 -.

- Remove the water drain hose - 6 - from the unlocking element - 2 - - arrow b - and remove the unlocking element.

Installation






- Connect the water drain hose - 6 - to the unlocking element - 2 - - arrow a - and insert the rear lid.

- Turn the unlocking element in the direction of the - arrow b - until the hooks - 4 - catch behind the tread - 5 -.

- Install the bolts - 3 - and tighten.

Tightening specification - 3 -: 4 Nm

- Connect the connector - 1 - to the unlocking element - 2 -.

• Perform a function test on the unlocking components before closing the rear lid.

- Install trim panel rear lid lock.