Cap without Lock Cylinder

Cap without Lock Cylinder

Removing

• The cover - 5 - illustrated here may have a different shape.






- Remove the cover - 5 -.

- Install the assembly tool (T10389) into the door behind the hooks - 3 - for the cap - 1 -.

- Pull the assembly tool (T10389) toward the rear - arrow - until the hook is released.

- Remove the door handle - 2 - from the door in direction of - arrow a -.






- Remove the cap - 1 - at a right angle - arrow b -.

Installation

Perform the following:

- Remove the door handle - 2 - from the door in direction of - arrow a -.






- Install the cap - 1 - at a right angle into the bracket - arrow b -.






- Insert a screwdriver - 4 - on the hooks - 3 -.

- Install the cap - 1 - in the door.

- Push the screwdriver in just far enough - arrow - to release the hook.

- Install the cover - 5 -.