Gliding Piece

Gliding Piece

Removing

- Release the seat forward/back adjustment.

- Slide the front seat all the way back.

- Unlatch the front seat using the entry assistance handle.

- Fold the backrest forward and move the seat all the way forward at the same time.

- Remove the rear screw on the tunnel side from the seat.

- Slide and release the rocker switch - arrow A - from the gliding piece in the direction of the - arrow -.






- Remove the gliding piece - 1 - from the seat rail - 2 - toward the rear by tipping it slightly toward the tunnel.

Installation






- Install the slider into the seat rail - 1 - by slightly tipping it toward the tunnel.

- Engage the slider in the back catch - arrow -.

- Tighten the rear bolt on the seat on the tunnel side (40 Nm).

- Tilt the backrest back while sliding the seat all the way back (entry assistance).

- Release the seat forward/back adjuster and slide the front seat into the desired position.

• It is not necessary to adjust the slider.