Seat Height Adjustment Handle

Seat Height Adjustment Handle

• The seat height adjustment handle can be replaced with the front seat installed.

Removing






• Remove the seat height adjustment - 1 - as instructed. Never remove the seat height adjustment from the lever - 2 -.

• If the tab - arrow - is damaged when removing the seat height adjustment handle, the handle cannot be reinstalled. It must be replaced.

- Pull seat height adjustment handle - 1 - up as far as the stop and hold it in that position.






- Carefully pull the seat height adjustment slightly off the front seat.

- Guide a small screwdriver between the seat height adjustment and the trim - 2 -.

- Unlock the release - 3 - using the screwdriver and at the same time, pull the seat height adjustment handle in the - direction of the arrow - from the lever.

Installation






Installation is reverse of removal, noting the following:

- Perform a visual inspection of the retaining strap - arrow -.

- If damage can be seen on the tab, installed a new seat height adjustment handle - 1 -.

- Make sure the tab in the seat height adjustment handle fits correctly into the notch on the lever.