Diagram 103/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Right rear ABS wheel speed sensor, Right front ABS wheel speed sensor, Left rear ABS wheel speed sensor, Left front ABS wheel speed sensor, ABS control module, Vehicle electrical system control module, Right rear ABS inlet valve, Left rear ABS inlet valve, Driving dynamics regulation switch valve 1, Driving dynamics regulation switch valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Anti-Lock Brake System (ABS) Overview [1][2]Brake Light Switch

G44 - Right rear ABS wheel speed sensor Anti-Lock Brake System (ABS) Overview [1][2]Diagrams

G45 - Right front ABS wheel speed sensor Anti-Lock Brake System (ABS) Overview [1][2]Diagrams

G46 - Left rear ABS wheel speed sensor Anti-Lock Brake System (ABS) Overview [1][2]Diagrams

G47 - Left front ABS wheel speed sensor Anti-Lock Brake System (ABS) Overview [1][2]Diagrams

J104 - ABS control module Anti-Lock Brake System (ABS) Overview Locations [1][2]Diagrams

J519 - Vehicle electrical system control module Locations Control modules in interior

N133 - Right rear ABS inlet valve

N134 - Left rear ABS inlet valve

N225 - Driving dynamics regulation switch valve 1

N226 - Driving dynamics regulation switch valve 2

T4y - 4-pin connector

T47 - 47-pin connector

T73a - 73-pin connector

(B131) - Connection 54 (in interior wiring harness)

* - Only for vehicles without brake pad wear indicator

Previous Diagram 103/3 (Tracks 15-28)

Next Diagram 103/5 (Tracks 43-56)