Diagram 15/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oxygen sensor after three way catalytic converter, Accelerator pedal position sensor 2, Engine control module, Secondary air injection solenoid valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G79 - Accelerator pedal position sensor Locations [1][2]Accelerator Pedal Position Sensor

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Three way Catalytic Converter -G130-

G185 - Accelerator pedal position sensor 2 Locations [1][2]Accelerator Pedal Position Sensor

J623 - Engine control module Locations

N112 - Secondary air injection solenoid valve Locations [1][2]Air Injection Control Valve

T4ao - 4-pin connector

T6h - 6-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations Oxygen Sensor After Three way Catalytic Converter -G130-

(D181) - Connection 87a (in engine compartment wiring harness) 2

Previous Diagram 15/15 (Tracks 183-196)

Next Diagram 15/17 (Tracks 211-224)