Cylinder Block Assembly: Testing and Inspection

Cylinder Bore, Checking






Special tools, testers and auxiliary items required

• Cylinder Gauge (VAS 6078)

Do not bore, hone, grind or rework the cylinder bores with workshop tools. Reworking damages the surface of the cylinder bore.

Test Sequence

- Measure diagonally at 3 positions transversely - A - and longitudinally - B -.

• Deviations from nominal dimension: Max: 0.08 mm

• Measurement of the cylinder bore may not be performed when the cylinder block is mounted on the engine and transmission holder (VAS 6095) , false measurements are possible.