Stabilizer Bar

Stabilizer Bar

Special tools, testers and auxiliary items required

• Torque Wrench 5-50 Nm (V.A.G 1331)

Removing

• The following work steps are described for the left side of the vehicle. These work steps also apply simultaneously for right side of vehicle.

- Remove the nut - 1 - and pull coupling rod - 2 - out of stabilizer.






• Do not loosen bolt - arrow - for tie rod - 3 -.

- Remove bolts - arrows - for stabilizer clamp.






- Remove the stabilizer bar.

Installing

- Insert the stabilizer bar in the vehicle.

- Tighten the bolts - arrows - for stabilizer clamp uniformly.






- Install the coupling rod - 2 - in the stabilizer bar and tighten the nut - 1 -.






Tightening Specifications