Clutch Overview, LuK

Clutch Overview, LuK






1 Dual Mass Flywheel

• Removing and Installing.

• Make sure it fits securely on the alignment pins.

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Disc

• For the correct allocation, refer to the Parts Catalog.

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK.

• Only replace together with the SAC pressure plate.

• Installed position, refer to => [ Clutch Disc Installed Position ] Clutch, LuK.

3 SAC Pressure Plate

• SAC = "Self Adjusting Clutch"

• Only replace together with the clutch disc.

• For the correct allocation, refer to the Parts Catalog.

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK.

• Checking the ends of the diaphragm spring. Refer to => [ Checking the Ends of the Diaphragm Spring ] Clutch, LuK.

• Checking the spring and rivet connections. Refer to => [ Checking the Spring and Rivet Connections ] Clutch, LuK.

• Release bearing with an additional plastic washer, refer to => [ Release Bearing with an Additional Plastic Washer ] Clutch Release Mechanism Overview, pressure plate is adapted, refer to => [ Only for Release Bearings with an Additional Plastic Washer: Pressure Plate Diaphragm Spring () with a Slightly Lower Installation Height ] Clutch Release Mechanism Overview.

4 Bolt

• M6 - 13 Nm

• M7 - 20 Nm

• Quantity: 6

• Loosen and tighten in small steps and in a diagonal sequence.