Clutch Overview, Sachs

Clutch Overview, Sachs






1 Dual Mass Flywheel

• Removing and installing.

• Make sure it fits securely on the alignment pins.

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Disc

• For the correct allocation, refer to the Parts Catalog.

• Only replace together with the pressure plate.

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs.

• Installed position, refer to => [ Clutch Disc Installed Position ] Clutch, Sachs.

3 Pressure Plate

• With a adjustment mechanism.

• For the correct allocation, refer to the Parts Catalog.

• Only replace together with the clutch disc.

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs.

• Checking the ends of the diaphragm spring. Refer to => [ Checking the Ends of the Diaphragm Spring ] Clutch, Sachs.

• Checking the spring and rivet connections. Refer to => [ Checking the Spring and Rivet Connections ] Clutch, Sachs.

• Release bearing with an additional plastic washer, refer to => [ Release Bearing with an Additional Plastic Washer ] Clutch Release Mechanism Overview, pressure plate is adapted, refer to => [ Only for Release Bearings with an Additional Plastic Washer: Pressure Plate Diaphragm Spring () with a Slightly Lower Installation Height ] Clutch Release Mechanism Overview.

4 Bolt

• M6 - 13 Nm.

• M7 - 20 Nm.

• Quantity: 6

• Loosen and tighten in small steps and in a diagonal sequence.

• For the correct allocation, refer to the Parts Catalog.