Air Filter and Engine Cover

Air Filter and Engine Cover

Removing

- Loosen the spring clamp - 2 - and the disconnect the intake hose.






- Remove the screws - 3 - and disconnect intake hose.

• Ignore 1.

- Pull the engine cover, using a jerking motion, out of the mount first at the front - arrow 1 -, then at the right rear - arrow 2 - and finally at the left rear - arrow 3 -.






- Carefully swivel the air filter with engine cover out of the rear area.

Installing

• The rubber bushings must not be treated with lubricant, neither for assembly in air filter nor for assembly on the engine.

- Position the engine cover correctly in its mounts and press on by hand.

The rest of the installation follows the reverse of the removal procedure.