Hood Assembly Overview

Hood Assembly Overview






1 Hood

• Removing and Installing, refer to => [ Hood ] Hood

• Adjusting, refer to => [ Hood, Adjusting ] Hood, Adjusting

2 Rubber stop

3 Hood catch

• Removing and Installing, refer to => [ Striker Pin ] Striker Pin

• Adjusting, refer to => [ Hood Striker Pin, Adjusting ] Hood Striker Pin, Adjusting

4 Adjusting buffer

5 Insulation

• Not installed in all models

• Removing and Installing, refer to => [ Noise Insulation ] Noise Insulation

6 Hinge

• Removing and Installing, refer to => [ Hood Hinge ] Hood Hinge

• Adjusting, refer to => [ Hood, Adjusting ] Hood, Adjusting

7 Support rod

• Removing and Installing, refer to => [ Support Rod ] Support Rod

8 Hood latch

• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch

• Adjusting, refer to => [ Hood Latch, Adjusting ] Hood Latch, Adjusting

9 Bolt

• 4 on each side

• Tightening specification: 20 Nm

10 Spray nozzles

• Removing and Installing