Striker Pin

Striker Pin

Removing






- Remove the striker pin inside the lock carrier cover.

- Remove the bolts - 2 - and remove the striker pin - 1 - from the lock carrier - 3 -.

Installation






- Install the striker pin - 1 - on the lock carrier - 3 - with the bolts- 2 -.

Bolt - 2 - tightening specification: 18 Nm

- Striker Pin, Adjusting, refer to => [ Rear Lid Striker Pin, Adjusting ] Rear Lid Striker Pin, Adjusting.

- Install the striker pin inside the lock carrier cover.