Instrument Panel Crossmember Assembly Overview

Instrument Panel Crossmember Assembly Overview

• It may be helpful to make drawings or take photos of any wires that are going to be loosened, removed and then installed. This assures the wires will be reconnected correctly.






1 Instrument panel crossmember

• Removing and Installing, refer to => [ Instrument Panel Crossmember ] Instrument Panel Crossmember

2 Bolt

• 20 Nm

• Quantity: 2

• Instrument panel crossmember bolt to center tunnel

3 Mount with extensor

• Front passenger side instrument panel crossmember bracket; bolted to the A-pillar

• The bracket can be used to align the instrument panel. Refer to => [ Instrument Panel, Aligning in Vehicle ] Instrument Panel, Aligning in Vehicle

• Removing and Installing, refer to => [ Front Passenger Side Instrument Panel Crossmember Bracket ] Front Passenger Side Instrument Panel Crossmember Bracket

4 Nut

• 20 Nm

• Quantity: 3

• Instrument panel crossmember nuts for bracket, refer to item 3 and item 9

5 Bolt

• 20 Nm

• Quantity: 4

• Instrument panel crossmember bolt to center tunnel

6 Threaded plate

• Threaded plate for center tunnel bolts

7 Center channel mount

8 Bolt

• 6 Nm

9 Mount with extensor

• Driver side instrument panel crossmember bracket; bolted to the A-pillar

• The bracket can be used to align the instrument panel. Refer to => [ Instrument Panel, Aligning in Vehicle ] Instrument Panel, Aligning in Vehicle

• Removing and Installing, refer to => [ Driver Side Instrument Panel Crossmember Bracket ] Driver Side Instrument Panel Crossmember Bracket

10 Bolt

• 20 Nm

• Located inside the plenum chamber on the left side

11 Adjuster

12 Brace