Access/Start Authorization Antenna in Rear Bumper (R136)

Access/Start Authorization Antenna in Rear Bumper (R136)

The access/start authorization antenna in rear bumper is located behind bumper cover at rear.

No coding, basic setting or adaptation is necessary if the access/start authorization antenna in rear bumper is replaced. Erase the entry in the DTC memory using the Vehicle diagnostic tester.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the rear bumper cover.

- Press the detents outward and pull the access/start authorization antenna in rear bumper - 1 - out of the bracket, while paying attention to the wires that are still connected.






- Release and disconnect the connector and remove the access/start authorization antenna in rear bumper - 1 -.

Installing

Install in reverse order of removal.