Central Locking Component Overview
Central Locking Component Overview
1 Alarm horn (H12)
• Installed location: in the plenum chamber
• Removing and installing
2 Connector station
• Installed location: Left A-pillar in the vehicle interior
• Remove the lower A-pillar trim in order to disconnect the connector.
3 Front passenger door control module (J387)
• Integrated in the front passenger window regulator motor (V148)
• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor
4 Front passenger door lock
• The door lock is attached to the door inner panel.
• The power central locking system is integrated in door lock.
• Removing and Installing, refer to => [ Door Lock ] Door Lock
5 Fuel tank lid unlock motor (V155)
• Removing and Installing, refer to => [ Fuel Filler Door Unlock Motor V155 ] Fuel Filler Door Unlock Motor V155
6 Rear lid lock
• Installed location: on the rear lid
• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch
7 Release element
• Installed location: on the rear lid
• Removing and Installing, refer to => [ Release Element ] Release Element
8 Driver side door lock
• The door lock is attached to the door inner panel.
• The power central locking system is integrated in door lock.
• Removing and Installing, refer to => [ Door Lock ] Door Lock
9 Driver door control module (J386)
• Integrated inside the driver window regulator motor (V147)
• Removing and Installing, refer to => [ Window Regulator Motor ] Window Regulator Motor
10 Driver side window regulator switch module
• Installed location: inside the driver door trim panel
• Removing and installing
11 Connector station
• Installed location: Left A-pillar in the vehicle interior
• Remove the lower A-pillar trim in order to disconnect the connectors.
12 Vehicle electrical system control module (J519)
• Installed location: under the instrument panel on the driver side
• Removing and installing
13 Engine hood contact switch (F266)
• Installed location: on the latch
• Removing and Installing