Torsion Bar Bearing

Torsion Bar Bearing

Removing

Move the front seat to the highest position. This reduces the spring force when removing and installing the torsion bar and the risk of damaging the threaded connections between the upper and lower seat frames.

The torsion bar exhibits considerable spring force. Always follow the points below to avoid accidents:

• Always remove and install the torsion bar in the sequence described and only using the tools specified.

• Never use pliers and other levers.

• Do not stand directly in front of the torsion bar when removing and installing it. Stand off to the side.

- Remove torsion bar. Refer to => [ Torsion Bar ] Torsion Bar.

- Remove both of the bracket halves - 1 - from the guide - 2 -.






• The illustration does not show the front seat belt latch anchorage point.

Installation

The torsion bar exhibits considerable spring force. Always follow the points below to avoid accidents:

• Always remove and install the torsion bar in the sequence described and only using the tools specified.

• Never use pliers and other levers.

• Do not stand directly in front of the torsion bar when removing and installing it. Stand off to the side.

Install in reverse order of removal.