Headlamp Control Module

-Control modules in the vehicle interior

Headlamp range control module -J431-


Component Location:





On glove compartment, right -arrow- .


Pin Arrangements:







A - Headlamp range control module -J431-
Connector:

B - 26-pin connector -T26c- inside the wiring harness

1 - Not used

2 - Powertrain (CAN bus high) connection 1 in the main wiring harness -B383-

3 - Powertrain (CAN bus low) connection 1 in the main wiring harness -B390-

4 - Not used

5 - Not used

6 - Not used

7 - Left rear level control system sensor -G76- (4)

8 - Not used

9 - Not used

10 - Left rear level control system sensor -G76- (2)

11 - Not used

12 - Not used

13 - Not used

14 - Not used

15 - Right front headlamp -MX2- (T14d/1)

16 - Left front headlamp -MX1- (T14c/3)

17 - Left front headlamp -MX1- (T14c/1)

18 - Left front headlamp -MX1- (T14c/4)

19 - Left front headlamp -MX1- (T14c/2)

20 - Right front headlamp -MX2- (T14d/4)

21 - Right front headlamp -MX2- (T14d/2)

22 - Right front headlamp -MX2- (T14d/3)

23 - Fuse 12 on fuse panel C -SC12-

24 - Ground connection 7 (in main wiring harness) -372-

25 - Not used

26 - Not used