Inspecting

Inspecting

Risk of injury. Observe the warnings and safety precautions => [ Dangers When Working with Batteries ] Dangers When Working with Batteries!

Prior to performing any measurements or tests, perform a visual inspection of the battery condition, the connections, and the secure installation of the battery.

• An improperly secured battery can lead to damage.

• Excessive vibration due to an improperly secured battery will reduce the battery service life, and the battery hold-down bracket could damage the battery housing and lead to electrolyte leakage.

• Make sure the battery is secure. Tighten the mounting bolt to the tightening specification, if necessary.

Visual Inspection Points

• Damage to the battery case. Acid can leak out if the case is damaged. Battery acid that has leaked out can cause sever damage to the vehicle. Acid that has leaked onto any part of the vehicle should be immediately treated with acid neutralizer or soap solution.

• Damage on the battery terminals. If battery terminals are damaged, contact with battery terminals clamps cannot be guaranteed. If the battery terminal clamps are not correctly installed and secured, the wiring may burn. Substantial malfunctions to the electrical system are a consequence. Safe operation of the vehicle can no longer be guaranteed.