Removal and Replacement

Engine Pre-Heater Overview

Not all vehicles have a pre-heater.






1 Guide Tube

• For the oil dipstick.

2 Left Cover

• Inside the front bumper cover.

3 Bracket

4 Connecting Cable

• Make sure it is attached securely.

5 Retainer

6 from the Oil Cooler

7 Pre-Heater

8 To the Coolant Thermostat Housing

9 Bolt

• 25 Nm

10 Adhesive Foil

• Attached to the pre-heater near the screw type clamp to prevent contact corrosion.

11 Bracket with Screw Type Clamp

• Tighten the screw type clamp to 3 Nm.