Transmission Input Speed Sensor

Transmission Input Speed Sensor (G182)

Removing

- Drain the transmission fluid. Refer to => [ Transmission Fluid, Draining and Filling ] Transmission Fluid, Draining and Filling.

- Remove the valve body. Refer to => [ Valve Body ] Service and Repair.

- Remove the transmission input speed sensor bolt - 1 -.






- Remove the transmission input speed sensor from the transmission housing.

Installing

Installation is performed in the reverse order of removal while observing the following:

- Press the transmission input speed sensor all the way into the transmission housing.

- Install the transmission input speed sensor bolt - 1 -. For the correct tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

- Install the valve body. Refer to => [ Valve Body ] Service and Repair.

- Fill the transmission fluid and check the level. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.