Power Seat Height Adjuster

Power Seat Height Adjuster

Removal and installation of seat height adjuster is described for left backrest frame. Removal and installation of the right seat height adjuster is performed in the same way.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove the front seat belt latch => [ Front Seat Belt Latches ] Front Seat Belt Latches

- Remove seat cap => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim => [ Power Seat Trim ] Power Seat Trim

- Remove electric seat trim bracket => [ Power Seat Trim Bracket ] Power Seat Trim Bracket

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and cushion from front seat back rests => [ Front Seat Cushion Cover and Upholstery ] Front Seat Cushion Cover and Upholstery

- Remove screw - 1 - in rear area of seat base.

• Screw - 1 - in installation position points from inside toward outside.

- Disconnect wiring harness - 2 - from height adjuster - 3 -.

- Remove the two bolts - 4 -.

- Remove height adjuster - 3 - from mounts in seat base.






Installing

- Install in reverse order of removal.