Diagram 70/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Data bus on board diagnostic interface, Instrument cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Control Modules in Interior

J533 - Data bus on board diagnostic interface Control Modules in Interior

K - Instrument cluster Control Modules in Interior

SB11 - Fuse 11 (on fuse panel B) Overview Of Fuses

SB15 - Fuse 15 (on fuse panel B) Overview Of Fuses

SB17 - Fuse 17 (on fuse panel B) Overview Of Fuses

SB24 - Fuse 24 (on fuse panel B) Overview Of Fuses

SC48 - Fuse 48 (on fuse panel C) Overview Of Fuses

T16d - 16-pin connector, on the diagnostic connector

T20e - 20-pin connector

T32c - 32-pin connector

T40 - 40-pin connector

(400) - Ground connection 35 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Fuses in the E-box, High

*2 - Fuses in the E-box, Low

*3 - Only for vehicles with Stop/Start system

*4 - Only for vehicles without Start/Stop system

Previous Diagram 70/11 (Tracks 127-140)

Next Diagram 70/13 (Tracks 155-168)