Access/Start Authorization Emergency Starting

Access/Start Authorization Emergency Starting

In the event that communication between ID sensor in the start button and the Comfort System Central Control Module (J393) is faulty (for example, start button battery is discharged), the engine can be started via remote control ignition key.

- Take start button out of electronic ignition lock.

- To do so, disengage locking latch - 1 - by pulling slider - arrow - on underside toward rear and pull start button - 2 - out of electronic ignition lock.






- Insert remote control ignition key into electronic ignition lock.

The ID sensor in ignition key is identified via a transponder in the electronic ignition lock and the steering is unlocked and start authorization is achieved.

Start procedure is performed in the same way as with the start button.

• If start button is reinserted into electronic ignition lock, make sure that locking latch - 1 - faces upward. Otherwise, the locking latch does not lock in the ignition lock.