Roof Antenna

Roof Antenna

Removing

- Remove the headliner.

- Disconnect all of the antenna wires - arrow - which are present. There can be up to 4.






- Remove the nut for the roof antenna (RX5).

- Remove the roof antenna upward.

Installing

Install in reverse order of removal.

• When inserting the antenna, ensure that the seal is properly seated. Both guide protrusions of gasket must be seated in the appropriate holes - arrows - in antenna base.






• After inserting the roof antenna, note the correct wiring routing for the antenna wire - 1 -.

• The antenna wire - 1 - must be routed through the wire opening for the nut - 2 -.