Front Seat Blower Fan V268, Passat CC from MY 2009 and CC from MY 2010
Front Seat Blower Fan V268, Passat CC from MY 2009 and CC from MY 2010
The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.
On vehicles registered in the USA, always follow "additional safety precautions for working on seat occupied recognition". Refer to => [ Passenger Occupant Detection System Safety Precautions ] Passenger Occupant Detection System Safety Precautionswhen working on the passenger front seat blower fan (V268).
Removing and installing the passenger front seat blower fan (V268) applies only to vehicles registered in the USA according to the following description.
Removing
Always read the General Safety Precautions before working on airbags, belt tensioners and battery cut-out units (pyrotechnical components). Refer to => [ Airbag, Belt Tensioner and Battery Cut-Out Units, General Safety Precautions ] Airbag, Belt Tensioner and Battery Cut-Out Units, General Safety Precautions.
- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
- Remove the front seat. Refer to => [ Front Seat ] Front Seat
- Attach the seat to the fixture for seat repair (VAS 6136).
- Remove the front seat belt latch => [ Front Seat Belt Latches ] Front Seat Belt Latches
- Remove seat cap => [ Cover Cap ] Cover Cap
Electric seat
- Remove electric seat front end trim => [ Power Seat Front Side Trim ] Power Seat Front Side Trim
- Remove electric seat trim => [ Power Seat Trim ] Power Seat Trim
- Remove electric seat trim bracket => [ Power Seat Trim Bracket ] Power Seat Trim Bracket
Partially electric seat
- Remove partially electric seat trim => [ Partial Power Seat Trim ] Partial Power Seat Trim
- Remove bracket and actuating lever, trim of partially electric/height adjustable seat => [ Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever ] Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever
Height-adjustable seat
- Remove height-adjustable seat trim => [ Height-Adjustable Seat Trim ] Height-Adjustable Seat Trim
- Remove bracket and actuating lever, trim of partially electric/height adjustable seat => [ Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever ] Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever
Passenger Seat with Pass-Through
- Remove the front seat trim => [ Passenger Seat Trim, with Pass-Through ] Passenger Seat Trim, with Pass-Through.
- Remove bracket and actuating lever, trim of partially electric/height adjustable seat => [ Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever ] Partial Power/Height-Adjustable Seat Trim Bracket and Operating Lever
Seat without height adjustment
- Remove trim of seat (without height adjuster) => [ Seat Trim, without Height Adjustment ] Seat Trim, without Height Adjustment
- Remove bracket, trim, seat (without height adjuster) => [ Seat Trim Bracket, without Height Adjustment ] Seat Trim Bracket, without Height Adjustment
All seats
- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest
- Remove the front seat cushion => [ Front Seat Cushion Cover and Upholstery ] Front Seat Cushion Cover and Upholstery
• Removal from the cover is not necessary.
- Cut the glued on fleece - 1 - around the front seat blower fan (V268) - 2 - and remove it from the cushion - 3 -.
- Remove the front seat blower fan (V268) from the cushion.
Installing
- Install the front seat blower fan (V268) - 2 - into the opening in the cushion - 1 -.
- Remove the protective strip from fleece - 1 - and affix the fleece to cushion - 3 - without any folds in it.
- Install in reverse order of removal.