Diagram 85/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated oxygen sensor, Heated oxygen sensor 2, Oxygen sensor after three way catalytic converter, Engine control module, Oxygen sensor heater, Heater for oxygen sensor 1 after catalytic converter, Heater for oxygen sensor 2 after catalytic converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated oxygen sensor Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G108 - Heated oxygen sensor 2 Locations Heated Oxygen Sensor 2 -G108- / Oxygen Sensor 2 Heater -Z28-

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

J623 - Engine control module, in the center plenum chamber Control Modules in Engine Compartment

T4no - 4-pin connector

T4vx - 4-pin connector, brown

T6w - 6-pin connector

T94 - 94-pin connector

Z19 - Oxygen sensor heater Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z29 - Heater for oxygen sensor 1 after catalytic converter Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

Z30 - Heater for oxygen sensor 2 after catalytic converter Oxygen Sensor 2 After Converter -G131- / Heater For Oxygen Sensor 2 After Converter -Z30-

(B359) - Positive connection 10 (87a) (in main wiring harness)

(D189) - Connection (87a) (in engine wiring harness)

Previous Diagram 85/14 (Tracks 169-182)

Next Diagram 85/16 (Tracks 197-210)