Diagram 85/4 (Tracks 29-42)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Generator with voltage regulator, Engine component power supply relay, Fuse panel A, Fuse panel B, Secondary air injection pump motor
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
CX1 - Generator with voltage regulator
J519 - Vehicle electrical system control module Control Modules in Interior
J757 - Engine component power supply relay
SA - Fuse panel A
SA1 - Fuse 1 (on fuse panel A)
SA3 - Fuse 3 (on fuse panel A)
SB - Fuse panel B
SB28 - Fuse 28 (on fuse panel B)
T2gc - Double connector
T4a - 4-pin connector, near the starter
T40 - 40-pin connector
T52c - 52-pin connector
V101 - Secondary air injection pump motor Locations
(249) - Ground connection 2 (in interior wiring harness)
(639) - Ground connection on left A-pillar Overview Of Ground Connections in Interior
(647) - Ground connection 3 on bulkhead Overview Of Ground Connections in Engine Compartment
* - Only for vehicles with recuperation
*2 - Only for vehicles with a generator (140 A)
Previous Diagram 85/3 (Tracks 15-28)
Next Diagram 85/5 (Tracks 43-56)