Removal and Replacement

Radiator, Fan Shroud and Fan Overview






1 Coolant Fan (V7)

• Removing and installing, refer to => [ Coolant Fan V7 and Coolant Fan 2 V177 ] Coolant Fan V7 and Coolant Fan 2 V177.

2 Nut

• 10 Nm

3 Fan Shroud

4 Lower Coolant Hose

• To the connection for the coolant thermostat.

5 Clip

6 Engine Coolant Temperature Sensor on Radiator Outlet (G83)

7 O-ring

• Replace if damaged.

8 Upper Coolant Hose

• From the coolant pump.

9 O-ring

• Replace if damaged.

10 Bolt

• 5 Nm

• To the charge air cooler.

11 Radiator

• Removing and installing, refer to => [ Radiator ] Radiator.

• After replacing, replace the entire amount of coolant.

• Engine code CBFA: With the radiator identification sensor.

12 Nut

• 10 Nm

13 Bolt

• 5 Nm

• To the radiator.

14 Radiator Fan 2 (V177)

• Removing and installing, refer to => [ Coolant Fan V7 and Coolant Fan 2 V177 ] Coolant Fan V7 and Coolant Fan 2 V177.

Radiator Identification Sensor

• The radiator identification sensor can be replaced only with the radiator.

Installing

- Coat the cylindrical part - arrow - of the new sensor with 2 grams of adhesive (AMV 195 KD1 01).






- Press the new sensor into the mount on the radiator until it engages.

Installed Position






- Arrow - indicates the direction of travel

- A - radiator

- B - radiator identification sensor