Rear Door Window Basic Height Adjustment

Rear Door Window Basic Height Adjustment

• The front bolt - 5 - can be adjusted by a total of 11 revolutions, rear bolt - 3 - by 16 revolutions. The center position is the base setting.

• One turn = 1 mm adjustment.

• Right turn = door window up, left turn = door window down.

• New window regulators are delivered with the correct basic setting.






- Run the door window - 1 - down all the way for the basic setting.

- Press the button one more time. The door window moves to the end stop.

- Remove the caps on the underside of the door.

The hex ball socket (T10058) is suitable for turning the adjusting screw.

- Screw in the front adjusting screws - 3 - all the way down.

- Screw in the rear adjusting screws - 5 - all the way down.

- Screw the front adjusting screws - 3 - exactly 5 1/2 turns upward.

- Screw the rear adjusting screws - 5 - exactly 8 turns upward.

The center position is now reached. The basic adjustment is completed.