Radio/Navigation Systems

Radio/Navigation Systems

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Note the chapter for the individual unit when removing and installing.

Removing

Perform the following steps before starting:

- Remove any CD's that may still be in the unit. Refer to the Owner's Manual.

- Turn off the ignition and all electrical consumers and remove the key.

Perform the following:

- Remove the center console cover - arrows - using the (3409).

- Remove the cover.






- Disconnect the connector from the center console cover - arrows - and remove it.






- Remove the bolts - arrows - from the radio/radio-navigation system.






- Pull the radio/radio-navigation system out of the installation slot just far enough so that the connectors on the back are accessible.

- Press the connector lock - arrows - together in the direction of the arrow.






- Move the locking bracket in the direction of - arrow - up and disconnect the connector.






- Disconnect the connectors - arrows - from the antenna connections.






Installing

- Plug in the connectors to the radio/radio-navigation system and lock them in.

- Slide the radio/radio-navigation system straight into the instrument panel.

• While sliding in the radio/radio navigation system into the instrument panel, never push on the display or on the control buttons because this can damage the unit.

- Tighten the 4 screws - arrows - on the radio/radio-navigation system.






- Reinstall the center console cover.

- If necessary, deactivate the anti-theft protection:

• Radio system RCD 510, refer to => [ RCD 510 (Premium 8) Radio ] RCD 510 (Premium 8) Radio.

• Radio Navigation System RNS 315, refer to => [ RNS 315 Radio Navigation System ] RNS 315 Radio Navigation System.

• Radio Navigation System RNS 510, refer to => [ RNS 510 Radio Navigation System ] RNS 510 Radio Navigation System.

• Premium Sound System Radio, refer to => [ Premium Sound System (Premium 7) ] Premium Sound System (Premium 7).

- Check the coding for the radio/radio-navigation systems and code them anew if necessary.

Coding for the radio systems, refer to => [ Radio Components, Adapting ] Testing and Inspection.

Coding for the radio/radio-navigation systems, refer to => [ Radio Navigation System Components, Adapting ] Testing and Inspection.