Lock Cylinder Cap

Lock Cylinder Cap

Removing

• When removing cover cap of lock cylinder housing, emergency key must not be turned and do not use prying motions with emergency key.

- Remove the emergency key from the remote control key.






- Press the emergency key - 3 - lightly - arrow a - into the opening on the underside of the lock cylinder housing cap.

- Remove the lock cylinder cap - 1 - gently from the underside of the door - arrow b - with the emergency key.

- Remove the cap upward from the lock cylinder housing.

Installation

- Slide the lock cylinder housing cap - 2 - lightly at an angle from above - arrow a - onto the lock cylinder housing.






- Press the lock cylinder housing cap - 2 - onto the door - arrow b - until the cap locks in with the lock cylinder housing.