Right Rear Backrest, Cover and Upholstery

Right Rear Backrest, Cover and Upholstery

Removing

- Remove center armrest. Refer to => [ Center Armrest ] Center Armrest

CC from 2010, Passat from 2006 and Passat CC from 2009

- Remove the seat bench. Refer to => [ Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010 ] Seat Bench, Passat from MY 2006, Passat CC from MY 2009 and CC from MY 2010

Passat Wagon from MY 2006

- Fold the bench seat forward.

All vehicles

- Remove rear right backrest. Refer to => [ Right Rear Backrest ] Right Rear Backrest

- Press the respective buttons in the head rest guides and remove both head rests from backrest.

• The cover and upholstery are only partially shown in the illustration.

- Press catches on both sides of cover - 1 - inward with a screwdriver - arrow A - and remove cover upward from backrest.

- Press catches on both sides of cover - 2 - inward with a screwdriver - arrow A - and remove cover upward from backrest.






- On back side, pry frame - 1 - out of mounts in backrest using Release Lever (T10039).

- Remove collar - 2 - on right side.

- Pry clamping profiles - 3 - and - 4 - out of mounts in backrest using screwdriver.

- Pry rest of clamping profile all around out of mounts in backrest, as described.






- Roll cover up at sides and press upholstery and cover over head rest guides.

- Using a small screwdriver, press apart side ribs of mounts - 1 - and pull out grip channels - 2 -.

- Release the cover - 3 - and cushion - 4 - from the backrest frame - 5 -.






Installing

- Install in reverse order of removal.