Light Switch E1

Light Switch E1

The following components are integrated in the light switch:

• Fog Lamp Switch (E7)

• Rear Fog Lamp Switch (E18)

• Headlamp Switch Light (L9)

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Turn light switch rotary knob to "0" position.

- Push in light switch rotary handle - arrow 1 - and turn it slightly toward right - arrow 2 -.






- Hold rotary handle in this position and pull Light Switch on rotary handle out of instrument panel - arrow 3 -.

- Disengage harness connector - arrow - and disconnect harness connector from Light Switch.






Installing

- Connect harness connector to Light Switch.

• For reasons of clarity, the harness connector is not depicted in the illustration.

- Hold Light Switch firmly in place and push light switch rotary hand in - 1 - and at the same time rotate it toward the right - 2 -.






- Hold rotary knob in this position and insert Light Switch into instrument panel - 3 -.

- Turn rotary handle to position "0", release and thus engage switch.