Tire, Dismounting

Tire, Dismounting

• Pay attention to the safety precautions and conditions. Refer to => [ Notes and Conditions ] Notes and Conditions.

- Release the air from the tires, remove the nickel-coated valve stem insert to do so.

- When pressing off the tire on a tire dismounting/mounting machine with a press-off blade, always make sure that the valve stem/tire pressure sensor - arrow - is located opposite the press-off blade - 1 -.






The press-off blade must be applied at a maximum of 2 cm from the rim flange.

- Remove the balance weights and any coarse dirt from the wheel.

- Press off both tire beads around the circumference while thoroughly applying tire mounting paste between the tire and rim flange - arrow -.