Mirror Adjusting Switch Element

Mirror Adjusting Switch Element

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trims, etc.), use commercially available adhesive tape to mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned.

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Carefully pry the upper section of the grip shell - 1 - out of door trim using the (VAS 3409) or a screwdriver.






- Release and disconnect all harness connectors - arrows - and remove the upper section of the grip shell.






- Open the retaining tabs - arrows - and remove the switch element from the installation frame.






Installation

Installation is performed in the reverse order of removal.