Central Locking Component Overview

Central Locking Component Overview






1 Connector station

• Installed location: right A-pillar

• To disconnect connector, release bellows at A-pillar.

2 Comfort System Central Control Module -J393-

• Installed location: under the instrument panel on the front passenger side and behind the glove compartment.

3 Front passenger door control module -J387-

• Integrated in window regulator motor.

• Removing and Installing, refer to => [ Window Regulator Motor, Removing ] Window Regulator Motor, Removing

4 Front passenger door central locking lock unit -F221-

• Door lock is secured to subframe.

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

5 Fuel Tank Lid Unlock Motor -V155-

• Installed location: behind right luggage compartment trim panel.

• Removing and Installing, refer to => [ Actuator ] Actuator

6 Striker pin with Rear Lid Opening Assist Unlock Stop Switch -F332-

• Installed location: bolted to the inside of the rear lid.

• Removing and Installing, refer to => [ Striker Pin with Closing Aid Motor ] Striker Pin with Closing Aid Motor

7 Rear lid lock

• Installed location: bolted to the rear lid

• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch

8 Rear Lid Handle Unlock Switch -E234-

• Installation location: in the emblem

• Removing and Installing, refer to => [ Release Element ] Release Element

9 Driver door central locking lock unit -F220-

• Electrical central locking system is integrated in door lock.

• Removing and Installing, refer to => [ Door Lock ] Door Lock

10 Driver door control module -J386-

• Integrated in window regulator motor.

• Removing and Installing, refer to => [ Window Regulator Motor, Removing ] Window Regulator Motor, Removing

11 Central Window Regulator Switch (in driver's door) -E189-

• Installed location: inside the door trim panel on the driver side

• Remove and installing central window regulator switch.

12 Connector station

• Installed location: left A-pillar

• To disconnect harness connector, release bellows at pillar.

13 Front Hood Switch -F266-

• Installed location: on the latch

• Hood Latch, Removing and Installing, refer to => [ Hood Latch ] Hood Latch

• Removing and installing contact switch.

14 Alarm Horn -H12-

• Installed location: under the right fender on the A-pillar