Glass Panel Assembly Overview

Glass Panel Assembly Overview






1 Glass Panel

• Removing and installing, refer to => [ Glass Panel ] Glass Panel

2 Guide tubes

• For glass panel and sun shade cables.

3 Guide tubes

• For glass panel covers.

4 Sunroof Motor

5 Bolt

• Quantity: 3

• 4.5 Nm

6 Bolt

• Quantity: 2

• 4.5 Nm

7 Cover

• To intermediate shaft mount.

8 Intermediate shaft

• For combined drive of glass panel and sun shade cables.

9 Guide rail

• For mounting sliding block, executes side movement of roof pillar.

10 Rear guide hinge

• Secured to main hinge.

• Guide rail cannot be replaced separately.

11 Rear water drain hose

• To install water drain hose on water drain, a thin ring must be applied with 1K Adhesive (D 469 101 A3).

12 Water drain

• The water drain cannot be replaced.

• To remove water drain on front guide rail, a thin bead of 1K Body Adhesive (D 469 101 A3) must be applied.

13 Front water drain hose

14 Slider

• Secured to guide rail

• 2-part, rubber base plate with plastic cover

15 Guide rail

• Secured to glass panel.

16 Front guide hinge

• Secured to roof pillar, is guided sideways with it.

17 Slider

• On glass panel

18 Mounting bracket

19 Protective caps

• For pressing wind deflector down.

20 Screws

• Quantity: 5

• 8 Nm

21 Wind deflector

• Removing and Installing, refer to => [ Wind Deflector Assembly Overview ] Wind Deflector