New Window, Preparing for Glazing

New Window, Preparing for Glazing

Only the ceramic layer is applied to all new windows.

• The application area for adhesive bead 3 is not pre-coated and not primed.

- Clean window circumference to width of 20 mm all around using cleaning solution D 009 401 04.

- Then dry the edge of the window with a lint-free cloth.

Ceramic application on window is not primer! It must be primed before the application of adhesive sealing material! Only use primer D 009 200 02!

- Apply primer - 4 - evenly in one motion using applicator D 009 500 25 - 3 - to the previously cleaned area - 1 - of window.






Make sure that glass adhesive is applied to primed area at a distance of approximately. 2 mm from sealing lip - 2 -.

• Drying time is approximately 10 minutes