Replacing Towing Recognition Control Module (J345)

Replacing Towing Recognition Control Module (J345)

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051B)

This test program provides support during replacement of the towing recognition control module.

- Connect the (VAS 5051B).

- In the (VAS 5051B) , select the "Guided fault finding" operating mode.

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Body repair procedures

• 01 - On Board Diagnostic (OBD) capable systems

• Towing sensor

• Functions

• Replace the towing recognition control module