Rear Lid Assembly Overview

Rear Lid Assembly Overview

• The rear lid on the Eos is made of plastic.

• Holes or cracks in the plastic cannot be repaired.






1 Rear lid

• Removing and Installing, refer to => [ Rear Lid ] Rear Lid

• Adjusting: the flush alignment is adjusted in the elongated holes in the hinge.

2 Release element

• Removing and Installing, refer to => [ Release Element ] Release Element

3 Rear lid catch

• Removing and Installing, refer to => [ Side Striker Pin ] Side Striker Pin

• Adjusting, refer to => [ Striker Pin, Adjusting ] Striker Pin, Adjusting

4 Rear lid latch

• Removing and Installing, refer to => [ Rear Lid Latch ] Rear Lid Latch

5 Gas strut

• Removing, refer to => [ Gas Strut ] Gas Strut

• Releasing the gas, refer to => [ Gas-Filled Strut, Releasing Gas ] Gas-Filled Strut, Releasing Gas

6 Hinge

7 Striker pin with closing aid motor

• Removing and Installing, refer to => [ Striker Pin with Closing Aid Motor ] Striker Pin with Closing Aid Motor

• Adjusting, refer to => [ Rear Lid Catch with Closing Aid Motor, Adjusting ] Rear Lid Catch with Closing Aid Motor, Adjusting

8 Emergency release actuation

• Emergency release routing, refer to => [ Rear Lid Emergency Release ] Rear Lid Emergency Release

9 Adjusting buffer

• Left and right

• Adjusting, refer to => [ Adjustment Buffer, Adjusting ] Adjustment Buffer, Adjusting