Access/Start Authorization Antenna 1 In Vehicle Interior (R138)

Access/Start Authorization Antenna 1 In Vehicle Interior (R138)

The access/start authorization antenna 1 in vehicle interior is installed under the front center console, in front of the gear selector lever.

• No coding, basic setting or adaptation is necessary if the access/start authorization antenna 1 in vehicle interior is replaced. Erase the entry in the DTC memory in "Guided Fault Finding" with the Vehicle diagnosis, testing and information system (VAS5051B).

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the center console cover.

- Pull the access/start authorization antenna 1 in vehicle interior (R138) - 1 - vertically upward out of the latching mechanism while paying attention to the connected wires.






- Disconnect the harness connector - arrow - and remove the access/start authorization antenna 1 in vehicle interior - 1 - from the vehicle.

Installation

Installation is performed in the reverse order of removal.