Roof Pillar Flaps, Adjusting

Roof Pillar Flaps, Adjusting






- Create a template of the trim - 1 - from a replacement part in which the three adjusting nuts - 2 - are exposed.

There are impressions on the back side of the trim.

- Securely clip template to roof pillar flap.

- To adjust gaps, loosen nuts - 2 - and create an even gap pattern - arrows -.

- Tighten nuts.

- To adjust height, loosen nuts - 2 - and rotate threaded pins - 3 - until the height of the trim is even with the surrounding components.

- Tighten nuts.

- Remove template and clip on trim.