Diagram 130/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS control module, Right rear ABS inlet valve, Left rear ABS inlet valve, Driving dynamics regulation switch valve 1, Driving dynamics regulation switch valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G44 - Right rear ABS wheel speed sensor Component Locations

G45 - Right front ABS wheel speed sensor Component Locations

G46 - Left rear ABS wheel speed sensor Component Locations

G47 - Left front ABS wheel speed sensor Component Locations

J104 - ABS control module Control modules in front part of vehicle - Overview of Control Modules

N133 - Right rear ABS inlet valve

N134 - Left rear ABS inlet valve

N225 - Driving dynamics regulation switch valve 1

N226 - Driving dynamics regulation switch valve 2

T2ar - Double connector

T2as - Double connector

T2at - Double connector

T2au - Double connector

T47a - 47-pin connector

(D146) - Left rear speed sensor positive connection (in engine compartment wiring harness)

(D147) - Left rear speed sensor negative connection (in engine compartment wiring harness)

(D148) - Right rear speed sensor positive connection (in engine compartment wiring harness)

(D149) - Right rear speed sensor negative connection (in engine compartment wiring harness)

(D184) - Left front speed sensor positive connection (in engine compartment wiring harness)

(D185) - Left front speed sensor negative connection (in engine compartment wiring harness)

Previous Diagram 130/2 (Tracks 1-14)

Next Diagram 130/4 (Tracks 29-42)