Diagram 171/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data bus on board diagnostic interface, Cornering lamp and headlamp range control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G76 - Left rear level control system sensor Adaptive Chassis DCC Components and Locations [1][2]Diagrams

J533 - Data bus on board diagnostic interface Control modules in front part of vehicle - Overview of Control Modules

J745 - Cornering lamp and headlamp range control module Control modules in front part of vehicle - Overview of Control Modules

SC1 - Fuse 1 (on fuse panel C) Overview Of Fuses

T4ar - 4-pin connector

T16ls - 16-pin connector

T20 - 20-pin connector

T26b - 26-pin connector

(384) - Ground connection 19 (in main wiring harness)

(638) - Ground connection on right A-pillar Overview Of Ground Connections in Interior

(B149) - Positive connection 2 (15a) (in interior wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(C67) - CAN bus high connection (in headlamp wiring harness)

(C68) - CAN bus low connection (in headlamp wiring harness)

(N5) - Connection 4 (in headlamp range control wiring harness)

(N6) - Connection 5 (in headlamp range control wiring harness)

(N7) - Connection 6 (in headlamp range control wiring harness)

* - Diagnostic connector

Previous Diagram 171/3 (Tracks 15-28)

Next Diagram 171/5 (Tracks 43-56)