Center Console Switches

Center Console Switches

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Carefully pry the boot of the selector lever at the latching mechanisms - arrows - out of the center console.






- Unscrew the mounting bolts - arrows -.






- Remove the installation frame and the ashtray from the center console.

- Release and disconnect the harness connectors - arrows -.






- Open the retaining tabs - arrows - and remove the switch from the installation frame.






Installation

Installation is performed in the reverse order of removal. Note the following:

- Tighten the mounting bolts - arrows - to 1.5 Nm during installation.