Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2012 >> Eos (1F8) L4-2.0L Turbo (CCTA) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Engine Control Module J623, GTI (2008 through 2009) and Eos through 11.08 >> without a Anti-Theft Immobilizer

without a Anti-Theft Immobilizer







without a Anti-Theft Immobilizer

• If the Engine Control Module (ECM) will be replaced, connect the vehicle diagnostic tester and perform the "Replacing Engine Control Module" guided function.

Removing

- Turn off the ignition.

- Remove the windshield wiper arms.

- Remove the plenum chamber cover.

- Remove the plenum chamber bulkhead.

- Disconnect the front connector - 1 - from ECM.






- Pry up the locking mechanism - 2 - slightly.

- Then slide the ECM out of retainer - arrow -.

- Disconnect the rear connector from the ECM.

Installing

- Connect and lock the rear connector to the ECM.

- Slide the ECM into the mount.

- Connect and lock the front connector to the ECM.

- Install the plenum chamber bulkhead.

- Install the plenum chamber cover.

Eos, refer to "Flush Bonded Windows" in

- Install the windshield wiper arms.
pro multis · About Operation CHARM